123 HP Envy 5030 printers Installation guide
Set up the HP envy 5030 printer hardware by following the steps given in the document before installing the printer software on your computer. The printer software is available on 123.hp.com/envy5030.
1. Unboxing the HP Envy 5030 printer: -
The first and foremost step is as usual unboxing. Take out the HP Envy 5030 printer from the box and get rid of the packing materials such as tapes, stickers and cardboards.
The unwanted decals in and around the printer control panel should be taken away. Eliminate the packing materials from the scanner glass by opening the scanner lid.
The packing materials in and around the printer should removed. Check whether you have removed all the hardware materials from the package box before discarding or recycling the packing materials.
2. Power cord connections in HP Envy 5030 printer: –
Power cord connection refers to the connection between the HP envy 5030 printer and electrical outlet. One end of the power cord should be linked to the stern of the printer and other end of the power cord should be plugged into the electrical opening.
Power on the HP Envy 5030 printer control panel and touch Continue. Touch country/region and also set the date, time. Wrap up setting the preferences by confirming.
3. Loading in HP Envy 5030 printer : –
After unpacking the printer, you have to fill the clear white paper into the main tray. Pull the input tray to unbolt and push the photo tray as far as feasible. Slide out the paper width guides in the input tray as far as possible and push the stack of papers inside the paper tray
Slide paper back and paper width guides in. make sure you lock the tray into place to avoid paper jams. You can modify the paper size, paper type settings
4. Installing ink cartridges in HP Envy 5030 printer : –
You can install the ink cartridges into the HP Envy 5030 printer by opening the cartridge access door. Notice the Change Ink option in the bottom right corner of the touch screen. Click it to change.
Get rid of the cartridge from the package to insert in its place. Pull the orange tab to get rid of the protective tap. Eradicate the tape vigilantly without laying a hand on the cartridge contacts or ink nozzles.
Pop in the tri-color cartridge in the left slot and black in the right slot. Make use of the above cited steps to insert other cartridges. Touch OK and the printer will calibrate and ally the cartridges. The HP envy 5030 printer prints an alignment page after the alignment is complete. Follow the instructions that appear on the screen and finish the setup
5. HP envy 5030 Printer software installation : –
After setting up the HP envy 5030 printer hardware, progress to the printer software installation. You are not supposed to attach the printer to a computer until you are instructed by the HP printing software. Download the most current version of your printing software from the website http://123.hp.com/envy5030